您现在的位置是：惠州市双盈钢结构工程有限公司 > 产品中心

.某工业园区内的一栋多层通用厂房,建于2009年,钢筋混凝土框架结构。2010年进行结构改造,在楼层和屋面增加了大量实验设备,使用活荷载超过了原设计值。本文详细介绍了该改造工程设计中,框架柱、梁的加固方法和构造措施。该改造方法通过调整设备布置,减小对原有结构的影响,从而达到缩短施工周期、降低工程造价的目的,为类似工程提供参考。某工业园区多层通用厂房结构加固设计

惠州市双盈钢结构工程有限公司26-05-16【产品中心】8人已围观

简介

很赞哦!（9165）

上一篇： .

A wastewater treatment plant in an industrial park in Central Jiangsu Province has a design capacity of 30 000 m/d, accepting electronic, photovoltaic, and other refractory industrial wastewater. For this complex industrial wastewater, an integrated process-"improved anaerobic-anoxicoxic (AAO) membrane bioreactor (MBR) advanced treatment"-was developed to achieve advanced treatment performance. The improved AAO process enhances nitrogen removal efficiency through a four-stage biochemical reaction (anaerobic-anoxic-aerobic-post-anoxic), while the advanced treatment employs an integrated process: "ozone catalytic oxidation–high-efficiency sedimentation–denitrification filter tank. " Actual operation results in 2024 showed that the average concentrations of chemical oxygen demand (CODCr), ammonia nitrogen (NH3-N), total phosphorus (TP), and fluoride were 11, 0.23, 0.02, and 2.83 mg/L, respectively-all significantly better than Class IV standards of the Surface Water Environmental Quality Standard (GB 3838-2002). The average effluent total nitrogen (TN) concentration was 2.9 mg/L, meeting Class 1A standards of the Pollutant Discharge Standard for Urban Wastewater Treatment Plants (GB 18918-2002). A portion of the effluent is reused for road sprinkling and plant greening, while the remaining effluent undergoes further purification via an ecological safety buffer zone. This project provides a "Biological Enhancement Advanced Treatment" model scheme for treating similar industrial wastewater.

某工业园区多层通用厂房结构加固设计

下一篇： .

某工业园区内的一栋多层通用厂房,建于2009年,钢筋混凝土框架结构.2010年进行结构改造,在楼层和屋面增加了大量实验设备,使用活荷载超过了原设计值.本文详细介绍了该改造工程设计中,框架柱、梁的加固方法和构造措施.该改造方法通过调整设备布置,减小对原有结构的影响,从而达到缩短施工周期、降低工程造价的目的,为类似工程提供参考.

相关文章

热门文章

站长推荐

分城市

友情链接